Mermaids: shiny materials

Send

Blue, blue, turquoise: in the fashionable palette all colors of sea water shimmer.

More shine!
Although not all the gold that glitters, but the foil on the shorts looks luxurious.
You will need:
Denim shorts (washed without rinsing agent); thermal film approx. 30 x 40 cm; heat-resistant paper or baking paper; silk paper; threads for sewing.
Description of work:
Pull the shorts onto the ironing board for the sleeve so that one front half of the shorts is on top. Apply silk paper and outline the contours of the front half: along the side seam, 1 cm below the entrance to the side pocket with the cutting barrel, along the seam of the belt seam, along the front edge of the zipper and the front middle seam, along the step seam, as well as 4 cm above the bottom of the shorts. Cut 2 symmetrical parts from thermofilm and iron them to the front halves - see the step-by-step instructions at the end of the article. Unscrew the lower edges of the shorts on the front side to a height of 4 cm, twist to a width of 2 cm. Sew the lapels at the side and step seams.

Like scales
Stylish accessory for mollusks: a bracelet glued with pearl sequins.
You will need:
1 plastic bracelet; tape with sequins approx. 2.60 m; universal glue.
Description of work:
Wrap the bracelet with sequin ribbon so that the sequins go on each other by 2-3 mm, and glue, applying glue to the bracelet section by section.Carefully stick the ends of the tape.

Steeper nowhere!
Using turquoise thermal foils and silk ribbon with raw cuts, ordinary Converse sneakers become a real star of the season!
How to iron a thermal foil to sneakers
You will need: sneakers, thermal foil, sheet of paper, a separation sheet of paper, silk ribbon with raw cuts, pencil, scissors, ironing board for sleeves.
STEP 1 Put the sneakers on the sleeve ironing board with a sheet of paper under the tongue. Outline the outline of the tongue.
STEP 2 Transfer the tongue contour to the thermal foil, cut out the tongue and iron it, while the matte side of the thermal foil is on top.
STEP 3 Remove the protective film from the thermal foil and iron the thermal foil in the corners once more. When ironing, be sure to use a release sheet of paper.

INSTRUCTION
You will need:
Sneakers (Converse) (washed without rinse aid); thermal film approx. 20 x 20 cm; heat-resistant paper or baking paper; a sheet of white paper; silk fabric flap for shoelaces.
Description of work:
See step by step instructions above. Tear 2 strips of 2 cm wide and a length equal to the length of the shoe laces from the flap of silk fabric (you can tear off several shorter strips and tie them together). Pass silk strips from the block sneakers like laces.
Photo: Jan Schmiedel (7), Catwalkpix.com (3). Production: Rushana Jennings.

Send